Cll meille: +358 403 777 181
€68,00 – €0,00
Safety:
Special precautions must be taken with MasterPR100: wear gloves to avoid contact with the skin and use a suitable air suction system.
Physical properties:
Physical properties
Density – 1.29 g / cm3.
Thermal properties:
Melting point -97 °C,
Boiling point 44 °C,
Flash point 14 °C
Storage and Distribution:
After long periods of storage, always check homogeneity and stir well before use to eliminate any possible sediment.
Storage is normally in a cool, dry and well ventilated facility away from oxidising agents. MasterPR100 should be kept out of direct sunlight, heat and open flames.
A bulk solvent exporter would normally distribute this solvent in bulk vessels or tank trucks. For transportation purposes, MasterPR100 is classed as a flammable liquid with a fire hazard rating of 2. A full bulk chemical distributor would export the solvent throughout regions such as the UK, Europe, Africa and America.
MasterPR100 Paint Remover – this is a three-component solvent (Dichloromethane, Butanone, Dimethyl ketone) which is a unique laboratory development MasterChem.
Paint Remover is highly flammable with a flashpoint of 14° C.
MasterPR100 is a thinner designed for the sole purpose of paint removal.
It can be used to clean equipment and to remove coatings applied by dipping.
| Weight | N/A |
|---|---|
| Käytettävissä oleva määrä | 1000 lit IBC-konttia, 200 lit rumpu/tynnyri, 25 lit muovipurkki, 640 lit IBC-astiaa |
