Cll meille: +358 403 777 181

Showing 1–24 of 49 results

Views:
Filter

Filter by price

Product tags

Antifreeze -36°C Green

825,005,85

Ready-to-use ethylene glycol-based coolant for all gasoline and diesel engine cooling systems. Also suitable as a working fluid for heat exchangers at low and medium temperatures. Ensures proper engine operation, frost and corrosion protection. Freezing temperature up to -36 ° C. Service life in cooling system 2-3 years. Exceeds most European and international standards, including: ASTM В3306, BS 6580 (1992), AFNOR NF R15-601, SAE J1034.

Antifreeze Specification (TDS)

Antifreeze / Coolant TOSOL -36°C Blue

825,005,85

Ready-to-use coolant for vehicles is intended for use in all types of modern cooling systems, as specified by the vehicle manufacturer. Protects the cooling system at temperatures above -36 ° C. Tosol can be used in combination with other coolants (made from ethylene glycol basil). Conforms to BS 6580 and ASTV 3306 standards.

Antifreeze MasterCoolant LONGLIFE – 36°C red

0,00

Trade name: Antifreeze MasterCoolant LONGLIFE – 36°C red

MasterCoolant EXTRA LONGLIFE – 38 ° C – high-efficiency, extended-life cooling fluid developed for optimal heat exchange and long-term protection of cooling systems of stationary gas engines and for most types of engines used in construction, quarrying, agricultural, railway and marine machinery.

Carboxylate additive technologies developed for high-efficiency system protection with maximum period of failure-free operation in a wide range of operating conditions.

Distinctive features

• Silicate-free composition provides improved heat exchange
• Helps reduce calcareous and phosphate deposits
• Provides up to 32000 hours of operation
• Promotes long-term protection of pump seals and corrosion protection
• Designed to work with limited service capabilities

Conforms to next standards:

ASTM D3306, ASTM D4985, BS 6580 (2010), UNE 26361-88, NATO S759, Ford ESE M97B49-A, WSS-M97B44-D & ESD M97 B49-A, G13, VW TL 774-F, GM 6277M, Mercedes MB 325.3, DAF 74002, DD93K217, MAN 324 Typ SNF, GMW 3420, Volvo VCS 418-000, Scania TI 2-98 0813 TB, Wartsila 32-9011

Does not damage rubber or plastic parts. Made in MasterChem.

Product Specification (TDS)

Antifreeze/coolant longlife – 38°C

850,005,95

Ready-to-use coolant for vehicles is intended for use in all types of modern cooling systems, as specified by the vehicle manufacturer. Protects the cooling system at temperatures above -38°C.

Denatured spirit (CAS 64-17-5)

1.700,000,00

Denatured Alcohol or ethanol or ethyl alcohol (also alcohol) or methylcarbinol (of the formula CH 3 CH 2 OH) is the best known alcohol. It is a colorless liquid under normal conditions. We offer only denatured spirits.

CAS: 64-17-5

Diethylene glycol (CAS 111-46-6)

15,000,00

Other names: 2,2′-Oxydi(ethan-1-ol), 2,2′-Oxybis(ethan-1-ol), 2-(2-Hydroxyethoxy)ethan-1-ol, Diethylene glycol, Ethylene diglycol, Diglycol, 2,2′-Oxybisethanol, 2,2′-Oxydiethanol, 3-Oxa-1,5-pentanediol, Dihydroxy diethyl ether

Diethylene glycol (DEG) is an organic compound with the formula (HOCH2CH2)2O. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, ether, acetone, and ethylene glycol.DEG is a widely used solvent. It can be a contaminant in consumer products; this has resulted in numerous epidemics of poisoning since the early 20th century.

CAS 111-46-6

Diethylene glycol specification (TDS)

Dipropylene glycol (CAS 110-98-5)

0,00

Other names: Dipropylene glycol, 4-Oxa-1,6-hexandiol, 1,1′-Oxybis(1-propanol), 1,1′-Oxybis(2-propanol)

Dipropylene glycol is a mixture of three isomeric chemical compounds, 4-oxa-2,6-heptandiol, 2-(2-hydroxy-propoxy)-propan-1-ol, and 2-(2-hydroxy-1-methyl-ethoxy)-propan-1-ol. It is a colorless, nearly odorless liquid with a high boiling point and low toxicity.

CAS 110-98-5

Dipropylene glycol monomethyl ether Dowanol DMP (CAS 34590-94-8)

5.450,000,00

Dipropylene glycol monomethyl ether Dowanol DMP (CAS 34590-94-8)

Di(propylene glycol) methyl ether is an organic solvent with a variety of industrial and commercial uses. It finds use as a less volatile alternative to propylene glycol methyl ether and other glycol ethers. The commercial product is typically a mixture of four isomers.

Ester-aldehyde fraction EAF 88%

990,000,00

It is used in domestic heating or ground heating systems. MasterChem offers different freezing temperatures and different packages. The basic raw material for liquids. It is also used in printing houses, cleaning of printing machines, in paint and varnish industry for production of stains and dyes, in cleaning of equipment.

Product Specification (TDS)

Ethyl alcohol (denaturated) (CAS 64-17-5)

1.700,000,00

Application and use:

Ethyl alcohol is used in:

– Pharmacy as an external antiseptic for the disinfection of hands and surgical instruments

– perfumes for the production of cosmetics, as the main component of aerosols, perfumes, colognes, and is also part of such cosmetics as shampoos, shower gels, toothpastes

– In auto repair shops, this liquid is used for degreasing a metal surface, for painting a body, cleaning aggregates (ethyl alcohol EA8099)

– for domestic needs, it is space heating, cooking, detergent and a hand sanitizer (for example ethyl alcohol EA8099), to clean the surface of grease and oils

– c, non-freezing fluid in the heating systems of earthen loops, we have presented products with different freezing temperatures and different packaging

– the chemical industry is a solvent, it is used as a raw material for the production of certain chemicals, a component in the production of glass cleaning liquids for automobiles (we have products with different freezing temperatures and different packaging).

– in the printing industry as a solvent for washing equipment. We offer both a pure product (ethyl alcohol EA8099) and as a mixture where 90% ethanol and 10% ethyl acetate is a solvent product EE-9010.

– in the paint and varnish industry is used for the production of stains, dyes,

solvents for flushing equipment.

– in the glass industry for degreasing surfaces

– in the leather industry, this is an essential element in tanning leather

– in electronics: in the manufacture of microcircuits, as a necessary substance for the maintenance of equipment (for example, for cleaning it).

Tip: Store the product at a temperature between 0 °C and 35 °C and do not expose it to direct sunlight.

Properties:

Density: at 20 degrees C – 0.78 g/cm3 +-0.01

Color – colorless liquid

Ethylene glycol (CAS 107-21-1)

1.450,000,00

Ethylene glycol (1,2-dioxane, glycol, ethanediol-1,2) is a sweet-tasting, odorless, colorless, hygroscopic oily liquid. It is obtained by wetting ethylene in the presence of phosphoric or sulfuric acids. Ethylene glycol mixes well with water and alcohol. It has high boiling points and low freezing temperatures, which is why it is widely used as a heat carrier in heating and cooling systems. The crystallization temperature of the concentrate is higher than that of aqueous glycol solutions, therefore it must be diluted with distilled water before use.

CAS: 107-21-1

Ethylene glycol (TDS)

Ethylene glycol 35% – Master EWS35 (CAS 107-21-1)

22,000,00

Ethylene glycol (1,2-dioxane, glycol, ethanediol-1,2) is a sweet-tasting, odorless, colorless, hygroscopic oily liquid. It is obtained by wetting ethylene in the presence of phosphoric or sulfuric acids. Ethylene glycol mixes well with water and alcohol. It has high boiling points and low freezing temperatures, which is why it is widely used as a heat carrier in heating and cooling systems. The crystallization temperature of the concentrate is higher than that of aqueous glycol solutions, therefore it must be diluted with distilled water before use.

CAS: 107-21-1

Ethylene glycol 40% Master EWS-40 (CAS 107-21-1)

22,000,00

Concentration 40%, Freezing point, -24 ° C, Density, 1.056g / m3

Ethylene glycol 40% (Master EWS-40, water-glycol solution) is a mixture of high-quality ethylene glycol with distilled water in the form of an oily hygroscopic liquid with a crystallization temperature of -25 ° C.

CAS: 107-21-1

Fire Starter MasterChem

1,20

Alcohol-based fluid. Suitable for burning coals and wood. The emissions from burning our ignition are water vapour and carbon dioxide.

Liquid geothermal heating systems (ethanol 96%)

990,000,00

Very flammable!
Protect from ignition sources such as hot surfaces, flames, sparks. Do not smoke. Keep the container tightly closed. Use protective equipment-gloves, clothing and goggles. If the substance has gotten into the hair/skin, take off the contaminated clothes immediately and rinse immediately with plenty of running water. Keep in a cool, ventilated place. Dispose of empty packaging / containers in accordance with hazardous waste regulations.

Master Cleaner Hit 11

0,00

Concentrate of universal cleaning agent with alkaline properties on water base.
Master Cleaner Hit 11 MasterChem -.is a concentrated universal cleaning agent with alkaline properties based on water. (pH concentrate 12). Easily removes oil, fat contamination, traces of scotch, paint, markers… It can be used on various surfaces, but when working with non-ferrous metals, care should be taken!

Has extreme cleaning and degreasing properties, allowing saving up to 70% of the time.
Creates an antistatic effect can be used in steam generators and hot mist plants cleans deep and fast – saves up to 70% of the usually spent time easily removes any contaminants, including oil, from various surfaces removes unpleasant smells safe for leather and clothing does not contain phosphates, biodegradable, non-combustible, non-volatile cost-effective to use Recommended temperature in the working solution 30-60 ° C. – when the temperature rises efficiency product is increased

Master NOL30 PRO geothermal heating fluid

980,0028,00

Master NOL30 PRO is the high quality solution for filling geothermal heating systems

Description:

Master NOL30 PRO is a ready-made product for filling earth heating circuits from MasterChem specialists. This product is based on a 30% denatured ethanol solution for heat pumps. Ethyl alcohol is an environmentally friendly product, therefore it is especially recommended for heating systems of houses and apartments. It contains all the necessary additives for long-term operation of the heating system.
On our site you will also find Master NOL30 – this is a standard cheaper product that is used by those for whom the cost of the product is primarily important.

Master NOL30 standard geothermal heating fluid

650,00235,00

Master NOL30 standard solution for filling earthen heating circuits

Description:

Master NOL30 is a ready-made product for filling earth heating circuits from MasterChem specialists. This product is based on a 30% denatured ethanol solution for heat pumps. Ethyl alcohol is an environmentally friendly product, therefore it is especially recommended for heating systems of houses and apartments. This product is the most common among heating installers.
If you want a high quality product with a quality guarantee of up to 8 years, then we suggest considering Master NOL30 PRO.

MasterChem IE80 disinfectant

1.250,002,10

MasterChem IE80 disinfectant for rooms and surfaces

MasterChem IE80 is a universal disinfectant for surfaces and premises. It is a new product developed with a special formula to fight surface viruses and bacteria.
MasterChem offers universal disinfectants for objects and surfaces. Actively disinfects, deodorizes, cleans and removes grease, does not foam, does not require rinsing.
MasterChem IE80 provides comprehensive protection against major fungi, mold and infection-causing bacteria.
Due to its properties, MasterChem IE80 is especially suitable for hospitals, public spaces, gyms and social gatherings. For general and professional use.

MasterCoolant ECO -20°C ecological heat carrier (coolant)

0,00

Environmentally friendly coolant for heating systems, contains no harmful to human body ethylene glycol. Made on the basis of non-toxic propylene glycol, and therefore particularly suitable for heating of houses and apartments. Not for use in heating systems with aluminium radiators. MasterCoolant ECO -20°C contains propylene glycol, especially demineralized water, corrosion additives, antifoam agents, stabilizing additives and package of high quality, multifunctional additives.

MasterCoolant ECO -40°C ecological heat carrier (coolant)

0,00

Environmentally friendly coolant for heating systems, contains no harmful to human body ethylene glycol. Made on the basis of non-toxic propylene glycol, and therefore particularly suitable for heating of houses and apartments. Not for use in heating systems with aluminium radiators. MasterCoolant ECO -40°C contains propylene glycol, especially demineralized water, corrosion additives, antifoam agents, stabilizing additives and package of high quality, multifunctional additives.

MasterCoolant ECO CONCENTRATE ecological heat carrier (coolant)

0,00

Environmentally friendly coolant for heating, conditioning and ventilation systems, contains no harmful to human body ethylene glycol. Made on the basis of non-toxic propylene glycol, and therefore particularly suitable for heating of houses and apartments. Protects the system from freezing. Extends the life of heating equipment and protects it against freezing.

Back to Top

Shopping cart