Cll meille: +358 403 777 181

MasterPR100 Paint Remover


Special precautions must be taken with MasterPR100: wear gloves to avoid contact with the skin and use a suitable air suction system.
Physical properties:
Physical properties
Density – 1.29 g / cm3.
Thermal properties:
Melting point -97 °C,
Boiling point 44 °C,
Flash point 14 °C
Storage and Distribution:
After long periods of storage, always check homogeneity and stir well before use to eliminate any possible sediment.
Storage is normally in a cool, dry and well ventilated facility away from oxidising agents. MasterPR100 should be kept out of direct sunlight, heat and open flames.
A bulk solvent exporter would normally distribute this solvent in bulk vessels or tank trucks. For transportation purposes, MasterPR100 is classed as a flammable liquid with a fire hazard rating of 2. A full bulk chemical distributor would export the solvent throughout regions such as the UK, Europe, Africa and America.


MasterPR100 Paint Remover – this is a three-component solvent (Dichloromethane, Butanone, Dimethyl ketone) which is a unique laboratory development MasterChem.
Paint Remover is highly flammable with a flashpoint of 14° C.
MasterPR100 is a thinner designed for the sole purpose of paint removal.
It can be used to clean equipment and to remove coatings applied by dipping.

Additional information

Käytettävissä oleva määrä

1000 lit IBC-konttia, 200 lit rumpu/tynnyri, 25 lit muovipurkki, 640 lit IBC-astiaa

You may also like…

Back to Top

Shopping cart